I've seen a few post regarding Midi here so I was hoping someone might
be able to lend a hand with the following...
I've managed to read everything in a midi file that I need but are
stumped with the Midi TC Hours byte. I've found this article at:
http://www.borg.com/~jglatt/tech/mtc.htm which says:
In the data byte for the Hours High Nibble and SMPTE Type, the bits
are interpreted as follows:
0nnn x yy d
where nnn is 7. x is unused and set to 0. d is bit 4 of the Hours
Time. yy tells the SMPTE Type as follows:
0 = 24 fps
1 = 25 fps
2 = 30 fps (Drop-Frame)
3 = 30 fps
Does anyone have some sample code or able to explain how to turn a
Midi TC hex hour field into a SMPTE hour field and SMPTE type value.
Best regards,
Mark
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
|